Flue Ultraviolet Online Monitoring Gas Analyzer for Industry Use

• Customization: Available
• Brand: Kelisaike
• Customized: Non-Customized
• Model NO.: KF100
• Portable: Non Portable
• Certification: CE
• Gas: Customized
• Type: UV Analyzer
• Resonse Time(T90): Less Than 10s
• Power: 220VAC/50Hz 100W
• Protection Grade: IP42
• Sample Gas Input and Output Interface: ø 6 Tube Fittings
• Transport Package: Carton
• Specification: 19"x3Ux320mm
• Trademark: KELISAIKE or OEM
• Origin: Nanjing, China
• HS Code: 9027900000
• Production Capacity: 300PCS/Month
• Package Size: 80.00cm * 70.00cm * 50.00cm
• Package Gross Weight: 10.000kg

Product Description

High Accuracy Heat Tracing CEMS UV Hot-Wet SO2, NOx, O2, CO, CO2 Gas Analyzer

The analyzer based on UV absorption spectroscopy and chemometric algorithms to measure SO2, NOx, O2, NH3, Cl2, O3, H2S and other gases concentration, with high accuracy, high reliability, fast response time, wide application and other characteristics, the indicators have reached or exceeded similar products, it can be widely used in environmental online monitoring, industrial control, security monitoring and other occasions.

>>>Key Features

Full spectrum measurement and DOAS (Differential Optical Absorption Spectroscopy) algorithm, excelling in accuracy,  repeatability and anti-interference with moisture, dust.

Modular design and no moving parts, higher reliability and easier maintenance.

Pulse Xenon Lamp used as light source with over 10-year lifetime.

The adoption of diode array sensor enables instant spectrum acquisition and rapid response.

>>> Features and Benefits
1. Analyzer uses the following optical technology platform to get the UV absorption spectrum, the technology platform consists of light source, gas chamber, fiber optics and spectroscopy (including the diaphragm, holographic gratings, linear array detector) and other optical components.

2. UV-visible light emitted by the optical window into the gas chamber, is absorbed by the sample gas flowing through the measured gas chamber, carrying the tested sample gas absorbs light through the lens after gathering information coupled into optical fiber through the optical fiber transmission into the spectrometer splitting, sampling, to obtain the absorption spectrum of the gas.

3. Use DOAS technology spectrum analysis, can analyze the concentration of the gas in the relevant component.

>>> Measuring principle

1) The light source emits ultraviolet beam which transfers to gas cell through optical fiber.

2) After absorption by measuring gas, the light beam transfers through optical fiber to spectrometer.

3) Being dispersed through the grating, and converted into electric signal by the array sensor, a continuous absorption spectrum of measuring gas is thereafter obtained.

>>>Technology Comparison

Item	UV Hot-Wet   Method	NDIR
Spectral   Range	Complete and   continuous absorption spectra obtained through holographic grating and diode   array detection	Non Dispersive,   characteristic absorption spectra obtained through band-pass filter
Linear   Response	High wavelength   resolution secures linear response	band-pass   filtration compromises linear response
SO2 Loss	Hot-wet   prohibits SO2   dissolution	Condensation   inevitably causes SO2   loss
Sampling   System	Heat tracing.   Requests only dust filtration, simple and no corrosive	Cold-dry.   Requests dust filtration, condensation, water removal and corrosion proof
Zero   Calibration Period	Long (DOAS   algorithm)	Short
Anti-Interference	The combination   of complete & continuous absorption spectra, high wavelength resolution,   DAOS algorithm erases interference from dust, moisture and background gases	Vulnerable to   moisture interference
Gas Cell	Connected by optical fiber,   easy to replace and low maintenance cost	Complex to replace and   maintenance
Maintenance
Reliability	No moving parts	Moving parts   existed

>>>Technical Specifications

SO2, NOx Analyzer
Technical   Principle	UV-DOAS
Installation   type	Hot-wet    Extractive
Measurement   Range	0~200ppm,    0~1000ppm, 0~3000ppm
Zero   Drift	≤    ±2%F.S.
Span   Drift	≤    ±2%F.S.
Accuracy	≤    ±1%
Response   Time(T90)	≤    60s
Linearity	≤    ±1%F.S.
O2  Analyzer
Technical   Principle	Zirconia/Electrochemical
Measurement   Range	0~25%
Response   Time(T90)	≤    60s
Linearity	≤    ±2%F.S.
CO, CO2  Analyzer
Technical   Principle	NDIR
Installation   type	Extractive
CO   Measurement Range	0~1000    ppm
CO2   Measurement Range	0~20%
Zero   Drift	≤    ±2%F.S.
Span   Drift	≤    ±2%F.S.
Accuracy	≤    ±1%
Response   Time(T90)	≤    60s
Linearity	≤    ±2%F.S.

Technical Data for UV gas analyzer

Project	Indicators
SO2 Detection range	Min:0-50ppm,Max:0-100%,
NO Detection range	Min:0-50ppm,Max:0-100%,
O2 Detection range	0-25%, Electrochemical or zirconia
Linearity error	≤±1%F.S.
Repeatability	≤1%
Zero drift	≤±1%F.S./ week
Span drift	≤±1%F.S./week
Ambient temperature	5ºC~45ºC
Response time(T90)	<10s
Size	19" *3U*320mm
Analog interface	3-way 4-20mA output,2-way 4-20mA input
Data interface	4-way switch input; 8-way relay output
Communication Interface	1-way RS-232,1-way RS-485(Supports Mod-bus protocol)
Power	220VAC/50Hz 100W
Protection grade	IP42
Sample gas input and output interface	Ø6 Tube Fittings

>>> FAQ
1.How about the Delivery time?
Samples will be prepared  within 15 Days after 100% T/T in advance payment. QTY order will be delivered in 30 days.
2.What kind of payments does KELISAIKE support?
T/T, L/C, Western Union, Cash all are accepted.
3.What's the MOQ?
Generally speaking, the MOQ is 5PCS, but we can also provide you samples for quality inspection.
4.Do you charge for the samples?
According to our company policy,we just charge the samples based on EXW price.
5.Can you produce according to customers' design?
Sure.We are professional maunfacturer and OEM is welcome

>>>Company View

Nanjing KELISAIKE company is one of the largest safety equipment manufactures, possesing the most complete production range and specifications in the safety equipment industry of mainland China. Nanjing KELISAIKE was founded in 2004, including three subsidiaries in Beijing, Xi'an and Xinjiang, and more than 30 domestic sales service centers, with total registered capital of 5.16 million Yuan. Standard products and services cover the portable gas detector, fixed gas transmitter, wall-mounted gas detector, gas detector control unit, air breathing apparatus etc. Also Nanjing KELISAIKE is an experienced factory for OEM service, providing professional design and construction of the customize products. The products are widely used in fields of petroleum, chemical, gas transmission and distribution, warehousing, municipal gas, fire fighting, environmental protection, metallurgy, pharmacy, energy and power industry.
Nanjing KELISAIKE has passed IS9001 International Quality System Certification, which ensures all products' excellent performance and competitive prices.
KELISAIKE Faith
People-oriented and technology-innovated
KELISAIKE Principle
Quality first, integrity-based