H6 Air Quality Monitoring System for So2/Co/O2/No2/Pm2.5/Pm10

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: H6
• Brand: Kelisaike
• Customized: Customized
• Portable: Non Portable
• Certification: CE
• Gas: Pm2.5, Pm10 or Tsp
• Type: Gas Analyzer, Aqms-H6
• Measure Gases: O3, No2,Co, So2, H2s, Voc, Pm2.5,Pm10,Tsp
• Temperature: Measuring Range:-50 ~100ºC
• Resolution: 0.1ºC
• Accuracy: ±0.5ºC
• Transport Package: Wooden Case
• Specification: 60X15X80 cm
• Trademark: KELISAIKE
• Origin: Nanjing, Jiangsu, China
• Production Capacity: 500 Sets/Month

Product Description

H6 Air Quality Monitoring System for SO2/CO/O2/NO2/PM2.5/PM10
 

>>> Product Description

H6 Micro Ambient Air Quality Monitoring System is an economical product for providing real-time and accurate detection of outdoor air pollutants, with the performance close to the level of automatic monitoring system. Compared with lower price alternatives on the market, H6 provides accurate detection data comparable to standard stations. After calibration on site according to certified reference standards, it can reach the optimal traceability. Therefore, as an air quality monitoring system, it has high cost efficiency.

>>> Main Features

• No need to change the sample cutter, able to measure the mass concentration of PM10 and PM2.5;
• On-site calibration according to traceable reference standards;
• Optional zero gas calibration modules;
• Imported high precision four- electrode sensors;
• Modular design for configuration of any combination, easy to set different monitoring parameters on demand, suitable for large-scale grid distribution points
• Embedded processor of industrial grade for the circuit, suitable for harsh outdoor environments, with working environment temperature range of -50 to 100ºC;
• Dynamic heating control for air particulate sampling to remove the influence of water and fog on the measured data;
• An electronic flowmeter used to the measure the sampling flow speed of particulates and gaseous pollutants.
• Stable and reliable data transmission with the industrial grade data transmission module;
• Dual-channel communication mode to realize communication in extreme cases and ensure data continuity;
• Modular design, and high reliability CAN bus communication between modules; automotive electronic communication protocol to ensure the stability of the system;
• Remote data transmission and system state information readable remotely, as well as remote control, remote modification of instrument parameters, and fault diagnosis;
• Remote upgrade of terminal applications via the FTP server to realize tele-maintenance and ensure that users can use the latest applications and update system functions timely;
• Optional five meteorological parameters tester;
• Optional IP cameras with various parameters to ensure night and visual range shooting requirements, with automatic snapshot and real-time monitoring functions.
• On-site real-time data display: end instruments renew data every 5 seconds.
• The optional data service platform can display average minute, hourly and daily values. Report analysis function can generate daily, monthly and yearly reports, as well as trend reports. Same screen multi-points display, supporting mobile terminal data query and data push to the display terminal;
•Various installation methods, to be selected according to the site situation: spport, pole, etc. Each type of mounting is tight and secure and can resist the instantaneous 12 level wind force.  

>>> Technical Parameters
 

Gases	Measurement range(ppb)	Resolution (ppb)	LOD(ppb)	24 h drift zero / ppb
O3	0-1000	1	≤10	5%F.S
NO2	0-1000	1	≤10	5%F.S
CO	0-20000	1	≤150	5%F.S
SO2	0-1000	1	≤10	5%F.S
H2S(optional)	0-20000	1	≤150	5%F.S
VOC(optional)	0-40000	1	≤150	5%F.S

Gases

Optional
Meteorological parameters:

Temperature	Measuring range:-50 ~100ºC	RH	Measuring range: 0~100%RH
	Resolution: 0.1ºC		Resolution: 0.1%RH
	Accuracy:±0.5ºC		Accuracy:±3%RH
Wind speed	Measuring range: 0~70m/s	Resolution: 0.1m/s
	Start wind speed≥0.5m/s	Accuracy:±0.3m/s
Wind direction	Measuring range: 0~360°	Resolution:±0.1°
	Start wind speed≥0.5m/s	Accuracy:±3°
Atmospheric pressure	Measuring range: 10~1100hpa
	Resolution: 0.1hpa
	Accuracy: ±0.5hpa

Noise Parameters
 

Noise	IEC61672:2002 level 2 GB/T3785-2012 level 2 Level 1 noise level meter available	Frequency range	16~20KHz
Measurement range	30~140 dB	Frequency weighting	A, C, Z
Principle of noise sensor: High precision capacitive free-field microphone

Main Qualifications

CCEP China Certification of Environmental Products
CMA Test Report
 

>>> Our Services

1.For all our customers, our products have 1 year warranty and life-long maintenance.

2.All inquiries will be replied in 24 hours.

3.Providing technical support, professional engineers are specialized in dealing with gas monitoring problems you met.

4. OEM and ODM service are welcome

5.KELISAIKE plant is located in Nanjing, only 1 hour by high speedtrain from Shanghai. Welcome to visit the factory.

6.All products are well tested and packed before shipment; the certificate of inspection will be provided.
 

>>> Why choose KELISAIKE? 

1. Mutual benefit : We are a factory.  The price is much more competitive than others in the same quality.

2. Professional engineers: With 10+ years history, KELISAIKE has a professional engineering team: 4 engineers who have more than 10 years' experience and over 5 engineer assistants in gas detection line, with Hi-Tech manufacturing equipments, we make more accurate and stable products.
3. Customize : We have strong R&D team, the custom product as your request are available.
4. Free OEM service : (a) Silk-printing your Logo(≥100PCS). (b) Design your color box(≥500PCS). 
5. Mix order : We accept mix order, different model and small quantity order. 
6. After service: (a) 1 Year warranty. (b) If there's any inferior-quality products are found, new ones could be sent to replace at free cost in the next order after confirmation.


>>> FAQ

Q: Can I order one piece for sample to test the quality?
A: Yes, We recommend to check the sample before place qty order. 
Q: May I have your catalogue and price list for trial order in MOQ quantity?
A: All our products were shown on -line, please have a detailed looking and choose the satisfied models, or just send email to us.
Q: If I order big quantity, what's the good price?
A: Please send the detailed enquiry to us, including the Item Number, Quantity for each item, Quality request, Logo, Payment Terms, Transport method, Discharge place etc. Best quotation will be given to you as soon as possible.

>>> COMPANY VIEW

>>> Contact Us